Arkifloor SLE is a high performance three-component, self-leveling epoxy floor coating system. It is specially designed for impact and chemical resistance, with the ease of application on horizontal surfaces. Arkifloor SLE comprises high grade epoxy resins, hardener as curing agent and selected fine aggregates with colorfast pigments. It gives a smooth, flat, uniform yet hard coating to keep your indoor environment dust-free and hygienic.
A wide range of colours
- Application Method: ensure an even surface which primed with Arkiprimer. Lay Arkifloor SLE 2M on the primed substrate with the aid of a steel trowel and spread the material to the required thickness of + - 2mm. After spreading, use a nylon spike roller and roll back and forth on the same direction to release any air bubbles that may be trapped during the mixing of components.
- Mixing Ratio: Base: Hardener: Aggregates (4.5: 2.5: 10)
- Cleaning Procedure: Clean up equipment with thinner immediately after use.
Based and hardener be stirred thoroughly prior to use. Do not allow material ponding.
Theoretical Coverage at Recommended Dry Film
3.8 – 4.3 kg / m2 for 2mm thickness
As a heavy duty coating product, Arkifloor SLE 2M is an excellent system for old or new concrete and cementitious floor of industrial and commercial laboratories, food factories, manufacturing factories and warehouses. It is also suitable for use in any type of workshops, power and wafer plants as well as chemical storage rooms
Arkifloor SLE Base: 4.5kg/ can
Arkifloor SLE Hardener: 2.5kg/ can
Arkifloor SLE Aggregates: 10kg/ can
Interior / Exterior